Plumbing 101: Tips And Tricks For Your Pipes (4)

Home » Blog » Plumbing 101: Tips And Tricks For Your Pipes (4)

Plumbing 101: Tips And Tricks For Your Pipes (4)

By | 2019-02-09T23:23:35+00:00 February 9th, 2019|Categories: Uncategorized|

Plumbing 101: Tips And Tricks For Your Pipes

Ready to begin with your own plumbing jobs? Do you know where to start or how to begin? Do you know what equipment and techniques will work for your next task? Well, the tips that are listed below may be the very ones that you need.

If the water pressure on your street exceeds 60 pounds, you many want to consider installing a pressure reducing valve. Too much water pressure is actually harmful to your plumbing system and could cause excess water pressure. A pressure reducing valve cuts down your water pressure by almost 50 percent.

If you toilet is clogged up, the water is low and a plunger doesn’t work you could try dumping warm water from a bucket into the toilet from waist level or higher. You should repeat dumping warm water in the bowl when necessary and if the water gets low again.

Don’t forget to check the plumbing on the outside of your home before you leave on vacation! Any leaks that are there can end up damaging your foundation, especially if you go away during the winter. Check each faucet and pipe, including your sprinkler system, far enough ahead of time to be able to do repairs.

Do not use the liquid cleaning supplies that are designed to clear clogs. These cleaners are harmful and can damage your pipes as they clear the clog. Instead of using damaging liquids, use a plunger or a plumbing snake. These are much more effective and will not harm pipes.

When the temperature drops below freezing, protect exposed pipes from the weather by adding a source of heat near the pipes. Ranging from electrical tape applied directly to the pipes to small space heaters placed near exposed pipes, keeping the temperature above freezing can prevent costly repairs caused by frozen pipes.

If you live in an area where sewers are known to back up into homes. You will need to install a backflow valve into your floor drains. By doing this you can prevent future backup of sewage into your home. This device will save you much money from loss of property due to sewer water contamination, and it will also save many hours of labor needed to clean up after these backups.

When you’re leaving for vacation it’s a great idea to turn your gas water heater to the “vacation” setting before you leave. If you have an electric water heater you can turn the breaker off that leads to it instead. This will save you electricity which is being wasted on heating water you’re not using.

The truth to DIY plumbing is that you’re taking your life on the line when you start a project. You may drive yourself nuts, cost yourself an arm and a leg, and end up having to call in a professional to fix the mess you made – at double the price. Consider a professional first unless you really know what you’re doing.

Fair enough, you’re not going to become an expert overnight – but there are surely one or two pieces of advice here that you can use. Every job that you do yourself is one less job that you have to pay someone else to do!