A problem with your plumbing can happen anytime. If it does, you need to know what to do about it. It is possible for you to take care of many of these problems on your own. Here are some helpful tips to teach you how to handle plumbing problems yourself.
Are you searching for a simple tip to inspect your home for slow leaks in your plumbing system? Simply take a reading on your water meter before bedtime. Upon waking the next morning, without using any water overnight, take another reading. If the reading has changed, you will know that somewhere in your plumbing system you have an undetected, slow leak.
Don’t use drain cleaners on your plumbing as they’re very corrosive and can actually damage your pipes. Anything that says it’s harmful if applied to the skin can be harmful to whatever it touches! If you have a septic system then this is even MORE important as it will kill the bacteria which is digesting your waste.
Before embarking on a plumbing project, make sure that you’re aware of where the shutoff valve for water in your home is, as well as the valves for shutting off individual structures like sinks, toilets, etc. This way, if something goes wrong, you’ll be able to stop the water flow.
If you own property where the temperature gets below freezing for an extended amount of time each year, you should make sure that pipes located in unheated areas, such as crawl spaces and garages, are insulated. Pipes that are exposed to the outside elements or those that are prone to freezing, should be protected by heat tape or thermostat-controlled heat cables to prevent them from freezing.
Plumbing is one of those jobs that you should not do your self. If it is something easy like a toilet repair or changing out a faucet, go ahead and give it a try. If it is a major repair, then you are better off hiring a contractor and it may be required to have a licensed plumbing contractor do the work for you.
Watch out for decreased levels of intensity in the water flow in your bathroom. This can be a sign of calcium or mineral deposits disrupting water flow. If spotted early enough it may be possible to remedy this without having to replace the pipes.
You absolutely must use sealant on a joint unless it has been glued or soldered. Sealant tape is easy to use and will create an amazingly tight fit, so choose the right one for the job. Blue tape is for sealing a connection for water, and yellow tape is for gas joints.
When you have a plumbing problem that comes up in your home, you do not necessarily have to pay a plumber a lot of money to come out and fix it for you. The helpful points you learned in this article will enable you to care for basic plumbing maintenance and repairs around your home yourself.